Description
HIGH TRAFFIC HEAVY DUTY COMMERCIAL
BRUSHLESS DC SWING GATE OPERATOR
True Security… DSP Motion Control…
High Performance…
|
The Max Megatron 1400 PRO is capable of opening gates up to 1400 lbs./15 ft. or 1200 lbs./20 ft. Fast speed direct drive (no chains, belts, or pulleys) opens gate 90 degrees from 11.5 to 18 seconds based on weight of the gate and selectable speed control. The Megatron 1400 PRO ships with AGM 7 amp hour battery back up enabling over 400 cycles in case of power failure. This operator is also compatible with existing installations and in most cases can be directly bolted onto concrete pads used by the most common gate operators in the industry.
|
Specifications listed in blue are unique to Max Megatron 1400 PRO
-
Max Megatron 1400 PRO dimensions (18.3 W x 24.5 D x 21.3 H) 18.5 arm height
-
Heavy duty gear box 900:1 Size 70 for Megatron 1400 PRO
-
Megatron 1400 PRO capacity 1400lbs/15ft or 1200lb/20ft – gate speed 11 1⁄2 to 18 seconds
-
Large output shaft 3 1/4” diameter solid steel with cast iron clamping system for all Megatron
-
Direct gear drive (no chains, belts, or pulleys)
-
Mechanical and electrical manual gate release functions
-
Corrosion protection gold zinc coating
-
Continuous cycle at extreme temperature range. No overheating possibility
-
Intelligent ramp-up and ramp-down gate speed control for smooth operation
-
Shipping weight of Max Megatron 1400 PRO (205 lbs)
Specifications listed in blue are unique to to Max Megatron 1400 PRO
- Brushless DC motor equivalent to 1/2 HP AC motor
- Programmable gate speed controls, 16 selectable speeds
- Automatic gate position reset system
- Gate sync feature provides automatic gate movement synchronization
- Modular system design for ease of service
- Switchable 115/230V AC selection
- Adaptive DSP control for advanced brushless DC motion control
- Real time performance analyzer and event log (OBD PORT and Black Box)
-
Low voltage wiring capabilities for remote power up 1000 feet (no battery needed)
-
Solar ready battery module with built-in advanced solar regulator
-
Intelligent power management system with energy saver mode
-
Built-in current limited 12vdc and 24vdc outputs
-
Gold contact input connections and automobile grade connectors
-
Selectable open timer 0 to 60 seconds with timer off option
-
-4F to 165F (-20C to +74C) operational temperature range including battery performance without needing a heater
-
Robust lightning protection up to 20KVolts and 10KAmps on all inputs and outputs (44 Channels) including loop detector input connections
-
Tunable 16 position safety obstruction sensor, auto adaptable to gate weight and size
-
Dual motor overcurrent safety shut off for additional protection
-
This operator has battery backup providing 400 cycles in case of power failure
-
Three modes of selectable battery backup functions
-
State machine design electronics with ultra-fast microprocessor
-
On board three button station
Specifications listed in blue are unique to Max Megatron 1400 PRO
- High traffic intuitive loop management system for better security
- Advanced security features with built-in audible and remote alarms
- Magnetic lock control relay outputs with selectable delay times
- Tamper alert relay outputs triggered “on” if gate is forced open
- Audible alarm if gate is tampered with or ERD is triggered for higher security
- Gate partial open recorder
- Lockable cover with key lock release to prevent intruders and vandalism
- Gate disable feature, disables all inputs with exception of the fire department input for high security
- Built–in transaction buffer for high security
- Gate status outputs for gate monitoring
- Direct motor control of jog OPEN/CLOSE for manually moving a gate in case of emergency
- Advanced anti-tailgate features to provide higher security
- No need for magnetic lock with the robust output shaft and clamp design of the Max Megatron 1400 PRO
Specifications listed in blue are unique to to Max Megatron 1400 HP
- Adaptive obstruction sensor for much better gate safety system. 16 selectable sensitivity settings
- UL 325/991 compliant Class I, II, III, and IV. CSA approved
- Pinch arm protection design
- Dynamic magnetic brake system stops the gate immediately to prevent damage to obstructions
- Vehicle hit protection technology protects the gate operator from collision damage caused by automobile impact, avoiding costly repairs
- Built-in advanced entrapment protection and alarm output
- Built-in gate in motion alarm for industrial applications
MAX MEGATRON 1400 PRO Specifications
Values below are from Maximum Controls’ cut sheet (Rev B, September 2024) and the Megatron PRO Matrix III installation manual, version 2c.2.
| Gate type |
Vehicular swing gate |
| Duty cycle |
Continuous on AC power |
| Gate limit |
1,400 lb at 15 ft, or 1,200 lb at 20 ft |
| Input power |
Switchable: 115 VAC, 6 A, single phase, or 230 VAC, 2 A, single phase |
| Maximum draw |
3.5 to 4.5 A, depending on gate weight |
| Motor |
24 VDC brushless |
| Accessory power |
12 VDC and 24 VDC limited-current outputs |
| UL 325 classes |
Class I, II, III and IV |
| Entrapment protection |
Type A inherent (ERD sensor) built in, plus inputs for monitored Type B1 photocells and Type B2 sensing edges. The operator will not run until at least one external sensor is installed. |
| Part of the operator |
Matrix III controller, loop rack, 7.0 Ah AGM battery backup providing a minimum of 400 cycles |
| Frame |
1/4 in. cold-rolled steel, fully welded, gold zinc plated |
| Grounding |
Minimum 12 AWG, 600 V insulated wire to a ground point within 3 ft of the operator |
| Manufacturer-recommended sensors |
Omron E3K-R10K4-10R photocell; EMX IRB-MON and IRB-RET photocells; EMX WEL-200T/WEL-200R wireless edge link; Miller Edge R-Band wireless edge unit; ASO MAX Mini Edge contact edge sensor |
| Optional add-ons |
MAX Cloud App; MAX External Jog Switch |
Covering all four UL 325 classes, the same operator can serve a home of one to four single-family dwellings (Class I), multi-family housing, a hotel or a retail store (Class II), a loading dock closed to the public (Class III), or a guarded restricted-access site (Class IV). The leaf decides the fit: weigh and measure it before choosing this operator for a swing gate installation in Riverside or Corona.
Reviews
There are no reviews yet.