Description
HIGH TRAFFIC HEAVY DUTY INDUSTRIAL 24 V BRUSHLESS DC SLIDE GATE OPERATOR. MAXIMUM GATE WEIGHT 4000 LBS.
Fail safe, back drivable manual operation upon loss of AC power or battery depletion.
Max Rhino 4000 FS brushless DC sliding gate operator is a solar ready, size 50 chain powerhouse that upon complete power failure can be back driven, fail safe. Using one of our 16 dipswitches, the 4000 FS will run at 19 inches per second. Our patented chain drop can trigger an alarm wirelessly, silently. Lockable steel covers can limit unwanted program changes by the wrong personnel. Capable of continuous duty cycles to meet the high demands of industry. Full battery back up and emergency jog function allows entry in case of UL failure. These and many more features make the Max Rhino 4000 FS the perfect slide gate operator for your most demanding commercial projects. Class lll and lV only.
FEATURES SPECIFICATIONS
• Built-in battery backup
• 2 AGM (7Amp/Hr) 12V, Yuasa batteries, 40 cycles
• Operator does not rely on the batteries when AC power is present
• On board diagnostic logs 8000 past events, large LCD display
• Shows current and past errors and info
• Dynamic braking system, in closed position, will fight back if unauthorized push back is attempted.
• Audible alarm and relay out trigger when unauthorized entry (push back) is attempted
• Brushless DC Motor equivalent to 2 1/2 HP AC motor
• Gate capacity 4000 lbs
• 3-year warranty on gate operator
• Battery 1-year warranty
• Motor overcurrent safety shutoff for additional protection
• Direct drive gearbox in oil bath allows less moving parts (making the system more reliable) as well as quieter (virtually silent)
• Lightning Protection Advanced lightning strike protection up to 20,000 Volts/10,000 amp
• Continuous duty cycles at extreme temperature range -4oF to 165oF (-20oC to +74oC) operational temperature range including battery performance without needing a heater
• Safety monitor device types: Normally closed or 10K types (most safety inputs in the industry)
• UL 325/991 compliant Class III, and IV. CSA approved
• Rhino Slide Gate Operator dimensions (14.5” W x 19 5/8” D x 29” H) weight 225 lbs
• The chain tray can be used on this gate operator
• Chain #50 nickel plated • 30 ft included
• Independent open and closing speed control, adjustable from 19” per second to 10” per second
• Manual disconnect. Local switch, keypad, or any dry contact relay will release dynamic braking, allowing gate to be pushed back in case of emergency
• Programmable virtual limit standard
• Optional magnetic limit sensors available
• Gate status outputs for gate monitoring/Gate Open or Close
• Power options Input 115V/230V AC single phase
• Solar panel compatible (24V DC)
MAX RHINO 4000 FS Specifications
The Maximum Controls installation guide for this operator (Matrix III, version 1.4E) adds gate length, input current and sensor rules to the feature list above.
| Specification | Value |
|---|---|
| UL 325 usage class | Class III and Class IV only |
| Canadian certification | CAN/CSA C22.2 No. 247 |
| Gate type | Vehicular slide gate; not for pedestrian gates |
| Maximum gate length | 50 ft |
| Maximum gate weight | 4,000 lb, level gate |
| Duty cycle on AC power | Continuous |
| AC input (switchable) | 115 VAC at 12 A or 230 VAC at 6 A, single phase |
| Input fuse | 7 A, in the MAX toroid box |
| Motor | 24 V DC brushless, rated for 6 million cycles |
| Accessory power | 12 VDC and 24 VDC outputs; 250 mA maximum for a radio receiver |
| Entrapment protection | Built-in Type A (ERD sensor); monitored inputs for Type B1 photo eyes and Type B2 sensing edges, N.C. or 10K |
| Minimum sensors | Two, one for each direction of travel, or the operator will not run |
| Supplied with the operator | Metal cover (plastic cover optional); single-gang box with outlet for service use |
| Bi-parting gates | Two operators set to Primary and Secondary, linked by RS-485 |
| Sensor wiring pages in the manual | Omron E3K-R10K4; EMX IRB-MON and IRB-RET2 photo eyes; EMX WEL-200 wireless edge link; Miller R-Band monitored wireless edge |
Class III covers industrial sites, loading docks and other locations not open to the general public; Class IV covers guarded sites, such as airport security areas, where security personnel supervise entry. If your gate serves a multi-family complex of five or more units, a hotel, a commercial garage or a retail store, that is Class II, outside this operator’s rating. For industrial slide gates in Riverside and Corona, see our commercial electric gate opener service.
Reviews
There are no reviews yet.